【背景】
折腾：
【未解决】Cygwin下配置Linux内核出错：Makefile:419: *** mixed implicit and normal rules. Stop.
期间，发现一个帖子：
Crosstool Build Fails under cygwin
然后发现，其实是我前些天遇到的问题类似：
而且我是已经搞定了，所以，现在打算：
订阅此讨论组的mailing list，去回复一下他。
【折腾过程】
1.找了一下，是从该贴：
Crosstool Build Fails under cygwin
找到crosstool-ng主页：
然后巧了，看到最开始的新闻中，有提到mailing list：
| 2013-03-20: The mailing list is back to operational conditions! Thanks, and well done, sourceware.org! |
2.所以去看看：
http://sourceware.org/lists.html
然后，找了下，找到对应的crossgcc的：
3.进去页面：
The crossgcc mailing list archives
然后看到有关于要订阅的话，让填写那个表格：
然后填写好，点击Do it：
然后显示OK了：
很明显，上面也说到了，其实也是可以直接发邮件给：
而实现订阅的。
4.有空可以看看：
Sources.redhat.com mailing list FAQs
5.然后去163邮件去确认一下：
结果163那边，过了很多分钟后，也还是没收到邮件。
6.算了，换个邮件试试：
在：
http://sourceware.org/lists.html#faqs
中重新换个邮件去注册：
然后看到结果是：
很明显，是搞错那个Mailing list name了。。。
重新试试：
结果，去163收一下（我的是163代收我的crifan.com的邮件）结果立刻可以看到对应的邮件了：
然后按照提示去给对应的一个复杂的地址类似于：
[email protected] |
的地址，发送一个空邮件：
结果却也是，等了好长时间，还是没有任何回复的邮件。
7.另外，顺带贴出来邮件中的一些提示内容：
--- Administrative commands for the crossgcc-digest list --- I can handle administrative requests automatically. Please do not send them to the list address! Instead, send your message to the correct command address: To subscribe to the list, send a message to: <[email protected]> To remove your address from the list, send a message to: <[email protected]> Send mail to the following for info and FAQ for this list: <[email protected]> <[email protected]> Similar addresses exist for the digest list: <[email protected]> <[email protected]> To get messages 123 through 145 (a maximum of 100 per request), mail: <[email protected]> To get an index with subject and author for messages 123-456 , mail: <[email protected]> They are always returned as sets of 100, max 2000 per request, so you'll actually get 100-499. To receive all messages with the same subject as message 12345, send an empty message to: <[email protected]> The messages do not really need to be empty, but I will ignore their content. Only the ADDRESS you send to is important. You can start a subscription for an alternate address, for example "[email protected]", just add a hyphen and your address (with '=' instead of '@') after the command word: <[email protected]> To stop subscription for this address, mail: <[email protected]> In both cases, I'll send a confirmation message to that address. When you receive it, simply reply to it to complete your subscription. If despite following these instructions, you do not get the desired results, please contact my owner at [email protected]. Please be patient, my owner is a lot slower than I am ;-) --- Enclosed is a copy of the request I received. Return-Path: <[email protected]> Received: (qmail 12008 invoked by uid 48); 22 Aug 2013 08:08:29 -0000 Message-ID: <[email protected]> From: [email protected] Date: Thu, 22 Aug 2013 08:08:29 +0000 To: [email protected] User-Agent: Heirloom mailx 12.4 7/29/08 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit |
8.再去试了试，通过点击“回复”，而产生的回复邮件：
去回复一次，看看是否有效果。
结果还是不行。。。
【总结】
算了，暂时懒得理会了。。。
有空再折腾，然后去订阅mailing list，以及如何回复其中的message。
之后可以参考的帖子有：
Email Etiquette: Replying to Mailing Lists