【背景】
折腾：
期间，已经安装了openfire的rpm包，但是无法启动：
[root@bogon ~]# service openfire start
Starting openfire:
[root@bogon ~]# service openfire status
openfire is not running
[root@bogon ~]# service openfire on
Usage /etc/init.d/openfire {start|stop|restart|status|condrestart}
[root@bogon ~]# service openfire status
openfire is not running【解决过程】
1.再去试试systemctl，结果没有这个工具：
[root@bogon ~]# systemctl -bash: systemctl: command not found
2.先去看看各个服务的状态：
[root@bogon ~]# service --status-all atd (pid 1665) is running... auditd (pid 1118) is running... crond (pid 1650) is running... ip6tables: Firewall is not running. Table: filter Chain INPUT (policy ACCEPT) num target prot opt source destination 1 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 2 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 3 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 4 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8081 5 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:9090 6 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5701 7 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5269 8 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5275 9 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5222 10 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5223 Chain FORWARD (policy ACCEPT) num target prot opt source destination Chain OUTPUT (policy ACCEPT) num target prot opt source destination Kdump is operational lvmetad is stopped mdmonitor is stopped messagebus (pid 1248) is running... mysqld (pid 69798) is running... netconsole module not loaded Configured devices: lo eth0 eth1 Currently active devices: lo eth1 nginx (pid 1773) is running... openfire is not running master (pid 1640) is running... rdisc is stopped rsyslogd (pid 73837) is running... sandbox is stopped saslauthd is stopped openssh-daemon (pid 69512) is running... PID file exists, but process is not running[FAILED] [root@bogon ~]#
可以看到：
mysqld已经在运行了。
openfire没有运行，但是对应的端口9090已经有了。
3.参考：
CentOS 64位 安装openfire | 在这里-迦楠的后花园
去手动启动：
[root@bogon ~]# /etc/init.d/openfire start Starting openfire: [root@bogon ~]# service openfire status openfire is running [root@bogon ~]#
4.再去设置开机启动：
[root@bogon ~]# chkconfig openfire on [root@bogon ~]# chkconfig --list atd 0:off 1:off 2:off 3:on 4:on 5:on 6:off auditd 0:off 1:off 2:on 3:on 4:on 5:on 6:off blk-availability 0:off 1:on 2:on 3:on 4:on 5:on 6:off crond 0:off 1:off 2:on 3:on 4:on 5:on 6:off ip6tables 0:off 1:off 2:on 3:on 4:on 5:on 6:off iptables 0:off 1:off 2:on 3:on 4:on 5:on 6:off kdump 0:off 1:off 2:off 3:on 4:on 5:on 6:off lvm2-monitor 0:off 1:on 2:on 3:on 4:on 5:on 6:off mdmonitor 0:off 1:off 2:on 3:on 4:on 5:on 6:off messagebus 0:off 1:off 2:on 3:on 4:on 5:on 6:off mysqld 0:off 1:off 2:on 3:on 4:on 5:on 6:off netconsole 0:off 1:off 2:off 3:off 4:off 5:off 6:off netfs 0:off 1:off 2:off 3:on 4:on 5:on 6:off network 0:off 1:off 2:on 3:on 4:on 5:on 6:off nginx 0:off 1:off 2:off 3:off 4:off 5:off 6:off openfire 0:off 1:off 2:on 3:on 4:on 5:on 6:off postfix 0:off 1:off 2:on 3:on 4:on 5:on 6:off rdisc 0:off 1:off 2:off 3:off 4:off 5:off 6:off restorecond 0:off 1:off 2:off 3:off 4:off 5:off 6:off rsyslog 0:off 1:off 2:on 3:on 4:on 5:on 6:off saslauthd 0:off 1:off 2:off 3:off 4:off 5:off 6:off sshd 0:off 1:off 2:on 3:on 4:on 5:on 6:off tomcat6 0:off 1:off 2:off 3:off 4:off 5:off 6:off udev-post 0:off 1:on 2:on 3:on 4:on 5:on 6:off [root@bogon ~]#
【总结】
此处是通过：
/etc/init.d/openfire start
正常启动了openfire，并且可以通过：
service openfire status
确认已经正在运行了。