【问题】
折腾：
【记录】Cygwin下用arm-xscale-linux-gnueabi交叉编译log4c
虽然已经解决了：
但是又出现如下的，貌似相关的问题：
CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $ make make all-recursive make[1]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1' Making all in config make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/config' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/config' Making all in src make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src' make all-recursive make[3]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Making all in sd make[4]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -g -O2 -Wall -MT domnode-expat.lo -MD -MP -MF .deps/domnode-expat.Tpo -c -o domnode-expat.lo domnode-expat.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -g -O2 -Wall -MT domnode-expat.lo -MD -MP -MF .deps/domnode-expat.Tpo -c domnode-expat.c -fPIC -DPIC -o .libs/domnode-expat.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -g -O2 -Wall -MT domnode-expat.lo -MD -MP -MF .deps/domnode-expat.Tpo -c domnode-expat.c -o domnode-expat.o >/dev/null 2>&1 mv -f .deps/domnode-expat.Tpo .deps/domnode-expat.Plo mv: cannot stat `.deps/domnode-expat.Tpo': No such file or directory Makefile:318: recipe for target `domnode-expat.lo' failed make[4]: *** [domnode-expat.lo] Error 1 make[4]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' Makefile:277: recipe for target `all-recursive' failed make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Makefile:197: recipe for target `all' failed make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Makefile:338: recipe for target `all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1' Makefile:226: recipe for target `all' failed make: *** [all] Error 2
即：
| ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address |
【解决过程】
1.先去make clean：
CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $ make clean Making clean in examples make[1]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/examples' Making clean in helloworld1 make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/examples/helloworld1' rm -rf .libs _libs rm -f helloworld1 helloworld1 rm -f *.o rm -f *.lo make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/examples/helloworld1' Making clean in helloworld make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/examples/helloworld' rm -rf .libs _libs rm -f helloworld helloworld rm -f *.o rm -f *.lo make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/examples/helloworld' Making clean in . make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/examples' rm -rf .libs _libs test -z "liblog4c_examples.la liblog4c_userloc.la" || rm -f liblog4c_examples.la liblog4c_userloc.la rm -f "./so_locations" rm -f "./so_locations" rm -f application_1 application_1 rm -f application_2 application_2 rm -f application_3 application_3 rm -f *.o rm -f *.lo make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/examples' make[1]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/examples' Making clean in src make[1]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Making clean in log4c make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src/log4c' test -z "liblog4c.la" || rm -f liblog4c.la rm -f "./so_locations" rm -rf .libs _libs rm -f *.o rm -f *.lo make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src/log4c' Making clean in sd make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' rm -rf .libs _libs test -z "liblog4c_sd.la" || rm -f liblog4c_sd.la rm -f "./so_locations" rm -f *.o rm -f *.lo make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' Making clean in . make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src' rm -rf .libs _libs rm -f *.lo make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src' make[1]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Making clean in config make[1]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/config' rm -rf .libs _libs rm -f *.lo make[1]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/config' Making clean in . make[1]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1' rm -rf .libs _libs rm -f *.lo make[1]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1'
再去make试试，结果还是类似问题：
CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $ make make all-recursive make[1]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1' Making all in config make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/config' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/config' Making all in src make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src' make all-recursive make[3]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Making all in sd make[4]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -g -O2 -Wall -MT stack.lo -MD -MP -MF .deps/stack.Tpo -c -o stack.lo stack.c mkdir .libs arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -g -O2 -Wall -MT stack.lo -MD -MP -MF .deps/stack.Tpo -c stack.c -fPIC -DPIC -o .libs/stack.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -g -O2 -Wall -MT stack.lo -MD -MP -MF .deps/stack.Tpo -c stack.c -o stack.o >/dev/null 2>&1 mv -f .deps/stack.Tpo .deps/stack.Plo mv: cannot stat `.deps/stack.Tpo': No such file or directory Makefile:318: recipe for target `stack.lo' failed make[4]: *** [stack.lo] Error 1 make[4]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' Makefile:277: recipe for target `all-recursive' failed make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Makefile:197: recipe for target `all' failed make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Makefile:338: recipe for target `all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1' Makefile:226: recipe for target `all' failed make: *** [all] Error 2
2.参考：
重新去make clean，然后重新配置，加上–with-expat-prefix参数：
CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $ ./configure --prefix=$HOME/develop/crosstool-ng/x-tools/armxscalelog4c --build=i686-pc-cygwin --target=arm-xscale-linux-gnueabi --host=arm-xscale-linux-gnueabi --with-expat-prefix=$HOME/develop/crosstool-ng/x-tools/armxscaleexpat CC=arm-xscale-linux-gnueabi-gcc checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for arm-xscale-linux-gnueabi-strip... arm-xscale-linux-gnueabi-strip checking build system type... i686-pc-cygwin checking host system type... arm-xscale-linux-gnueabi checking for bison... bison -y checking for arm-xscale-linux-gnueabi-gcc... arm-xscale-linux-gnueabi-gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... yes checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-xscale-linux-gnueabi-gcc accepts -g... yes checking for arm-xscale-linux-gnueabi-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of arm-xscale-linux-gnueabi-gcc... none checking how to run the C preprocessor... arm-xscale-linux-gnueabi-gcc -E checking for flex... flex checking lex output file root... lex.yy checking lex library... none needed checking whether yytext is a pointer... no checking for gawk... (cached) gawk checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for arm-xscale-linux-gnueabi-ranlib... arm-xscale-linux-gnueabi-ranlib checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ld used by arm-xscale-linux-gnueabi-gcc... /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe checking if the linker (/home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe) is GNU ld... yes checking for /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe option to reload object files... -r checking for BSD-compatible nm... /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-nm -B checking how to recognise dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for arm-xscale-linux-gnueabi-g++... arm-xscale-linux-gnueabi-g++ checking whether we are using the GNU C++ compiler... yes checking whether arm-xscale-linux-gnueabi-g++ accepts -g... yes checking dependency style of arm-xscale-linux-gnueabi-g++... none checking how to run the C++ preprocessor... arm-xscale-linux-gnueabi-g++ -E checking for arm-xscale-linux-gnueabi-g77... no checking for arm-xscale-linux-gnueabi-xlf... no checking for arm-xscale-linux-gnueabi-f77... no checking for arm-xscale-linux-gnueabi-frt... no checking for arm-xscale-linux-gnueabi-pgf77... no checking for arm-xscale-linux-gnueabi-cf77... no checking for arm-xscale-linux-gnueabi-fort77... no checking for arm-xscale-linux-gnueabi-fl32... no checking for arm-xscale-linux-gnueabi-af77... no checking for arm-xscale-linux-gnueabi-xlf90... no checking for arm-xscale-linux-gnueabi-f90... no checking for arm-xscale-linux-gnueabi-pgf90... no checking for arm-xscale-linux-gnueabi-pghpf... no checking for arm-xscale-linux-gnueabi-epcf90... no checking for arm-xscale-linux-gnueabi-gfortran... no checking for arm-xscale-linux-gnueabi-g95... no checking for arm-xscale-linux-gnueabi-xlf95... no checking for arm-xscale-linux-gnueabi-f95... no checking for arm-xscale-linux-gnueabi-fort... no checking for arm-xscale-linux-gnueabi-ifort... no checking for arm-xscale-linux-gnueabi-ifc... no checking for arm-xscale-linux-gnueabi-efc... no checking for arm-xscale-linux-gnueabi-pgf95... no checking for arm-xscale-linux-gnueabi-lf95... no checking for arm-xscale-linux-gnueabi-ftn... no checking for g77... g77 configure: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to [email protected]. checking whether we are using the GNU Fortran 77 compiler... yes checking whether g77 accepts -g... yes checking the maximum length of command line arguments... 8192 checking command to parse /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-nm -B output from arm-xscale-linux-gnueabi-gcc object... ok checking for objdir... .libs checking for arm-xscale-linux-gnueabi-ar... arm-xscale-linux-gnueabi-ar checking for arm-xscale-linux-gnueabi-ranlib... (cached) arm-xscale-linux-gnueabi-ranlib checking for arm-xscale-linux-gnueabi-strip... (cached) arm-xscale-linux-gnueabi-strip checking for correct ltmain.sh version... yes checking if arm-xscale-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no checking for arm-xscale-linux-gnueabi-gcc option to produce PIC... -fPIC checking if arm-xscale-linux-gnueabi-gcc PIC flag -fPIC works... yes checking if arm-xscale-linux-gnueabi-gcc static flag -static works... yes checking if arm-xscale-linux-gnueabi-gcc supports -c -o file.o... yes checking whether the arm-xscale-linux-gnueabi-gcc linker (/home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by arm-xscale-linux-gnueabi-g++... /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe checking if the linker (/home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe) is GNU ld... yes checking whether the arm-xscale-linux-gnueabi-g++ linker (/home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe) supports shared libraries... yes checking for arm-xscale-linux-gnueabi-g++ option to produce PIC... -fPIC checking if arm-xscale-linux-gnueabi-g++ PIC flag -fPIC works... yes checking if arm-xscale-linux-gnueabi-g++ static flag -static works... yes checking if arm-xscale-linux-gnueabi-g++ supports -c -o file.o... yes checking whether the arm-xscale-linux-gnueabi-g++ linker (/home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for g77 option to produce PIC... -fPIC checking if g77 PIC flag -fPIC works... no checking if g77 static flag -static works... yes checking if g77 supports -c -o file.o... yes checking whether the g77 linker (/home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for pthread_mutex_init in -lpthread... yes configure: Compile with rollingfile code checking for ANSI C header files... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for inttypes.h... (cached) yes checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for unistd.h... (cached) yes checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking varargs.h usability... no checking varargs.h presence... no checking for varargs.h... no checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking for pthread.h... (cached) yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for working alloca.h... yes checking for alloca... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... no checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for getpagesize... yes checking for working mmap... no checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... no checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking whether utime accepts a null argument... no checking for vprintf... yes checking for _doprnt... no checking for gettimeofday... yes checking for memset... yes checking for munmap... yes checking for nl_langinfo... yes checking for strdup... yes checking for strerror... yes checking for strncasecmp... yes checking for strrchr... yes checking for strstr... yes checking for utime... yes checking for sbrk... yes checking for doxygen... /usr/bin/doxygen checking for dot... no checking for latex... /usr/bin/latex checking for EXPAT - version >= 1.95.1... cross compiling; assumed OK... yes configure: creating ./config.status config.status: creating Makefile config.status: creating log4c-config config.status: creating log4crc.sample config.status: creating log4c.spec config.status: creating config/Makefile config.status: creating doc/Makefile config.status: creating doc/Doxyfile config.status: creating doc/main.doc config.status: creating src/Makefile config.status: creating src/log4c/Makefile config.status: creating src/log4c/version.h config.status: creating src/sd/Makefile config.status: creating tests/Makefile config.status: creating tests/log4c/Makefile config.status: creating examples/Makefile config.status: creating examples/log4crc config.status: creating examples/helloworld/Makefile config.status: creating examples/helloworld1/Makefile config.status: creating src/config.h config.status: src/config.h is unchanged config.status: executing depfiles commands config.status: executing default commands CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $
3.再去make试试，结果一堆的Bad address，但是却可以继续编译：
CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $ make make all-recursive make[1]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1' Making all in config make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/config' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/config' Making all in src make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src' make all-recursive make[3]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Making all in sd make[4]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' source='stack.c' object='stack.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o stack.lo stack.c mkdir .libs arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c stack.c -fPIC -DPIC -o .libs/stack.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c stack.c -o stack.o >/dev/null 2>&1 source='list.c' object='list.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o list.lo list.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c list.c -fPIC -DPIC -o .libs/list.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c list.c -o list.o >/dev/null 2>&1 source='malloc.c' object='malloc.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o malloc.lo malloc.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c malloc.c -fPIC -DPIC -o .libs/malloc.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c malloc.c -o malloc.o >/dev/null 2>&1 source='factory.c' object='factory.lo' libtool=yes \
4.虽然有Bad address，但是可以编译完成：
CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $ make make all-recursive make[1]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1' Making all in config make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/config' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/config' Making all in src make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src' make all-recursive make[3]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Making all in sd make[4]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' source='stack.c' object='stack.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o stack.lo stack.c mkdir .libs arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c stack.c -fPIC -DPIC -o .libs/stack.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c stack.c -o stack.o >/dev/null 2>&1 source='list.c' object='list.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o list.lo list.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c list.c -fPIC -DPIC -o .libs/list.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c list.c -o list.o >/dev/null 2>&1 source='malloc.c' object='malloc.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o malloc.lo malloc.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c malloc.c -fPIC -DPIC -o .libs/malloc.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c malloc.c -o malloc.o >/dev/null 2>&1 source='factory.c' object='factory.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o factory.lo factory.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c factory.c -fPIC -DPIC -o .libs/factory.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c factory.c -o factory.o >/dev/null 2>&1 source='hash.c' object='hash.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o hash.lo hash.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c hash.c -fPIC -DPIC -o .libs/hash.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c hash.c -o hash.o >/dev/null 2>&1 source='sprintf.c' object='sprintf.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o sprintf.lo sprintf.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c sprintf.c -fPIC -DPIC -o .libs/sprintf.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c sprintf.c -o sprintf.o >/dev/null 2>&1 source='test.c' object='test.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o test.lo test.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c test.c -fPIC -DPIC -o .libs/test.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c test.c -o test.o >/dev/null 2>&1 source='sd_xplatform.c' object='sd_xplatform.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o sd_xplatform.lo sd_xplatform.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c sd_xplatform.c -fPIC -DPIC -o .libs/sd_xplatform.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c sd_xplatform.c -o sd_xplatform.o >/dev/null 2>&1 source='error.c' object='error.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o error.lo error.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c error.c -fPIC -DPIC -o .libs/error.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c error.c -o error.o >/dev/null 2>&1 source='domnode-expat.c' object='domnode-expat.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o domnode-expat.lo domnode-expat.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c domnode-expat.c -fPIC -DPIC -o .libs/domnode-expat.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c domnode-expat.c -o domnode-expat.o >/dev/null 2>&1 /bin/sh ../../libtool --tag=CC --mode=link arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib -lexpat -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib -o liblog4c_sd.la stack.lo list.lo malloc.lo factory.lo hash.lo sprintf.lo test.lo sd_xplatform.lo error.lo domnode-expat.lo -lpthread arm-xscale-linux-gnueabi-ar cru .libs/liblog4c_sd.a .libs/stack.o .libs/list.o .libs/malloc.o .libs/factory.o .libs/hash.o .libs/sprintf.o .libs/test.o .libs/sd_xplatform.o .libs/error.o .libs/domnode-expat.o ../../libtool: line 5963: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-ar: Bad address arm-xscale-linux-gnueabi-ranlib .libs/liblog4c_sd.a ../../libtool: line 5963: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-ranlib: Bad address creating liblog4c_sd.la (cd .libs && rm -f liblog4c_sd.la && ln -s ../liblog4c_sd.la liblog4c_sd.la) make[4]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' Making all in log4c make[4]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src/log4c' source='rc.c' object='rc.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o rc.lo rc.c mkdir .libs arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c rc.c -fPIC -DPIC -o .libs/rc.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c rc.c -o rc.o >/dev/null 2>&1 source='init.c' object='init.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o init.lo init.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c init.c -fPIC -DPIC -o .libs/init.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c init.c -o init.o >/dev/null 2>&1 source='appender_type_stream.c' object='appender_type_stream.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o appender_type_stream.lo appender_type_stream.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c appender_type_stream.c -fPIC -DPIC -o .libs/appender_type_stream.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c appender_type_stream.c -o appender_type_stream.o >/dev/null 2>&1 source='appender_type_stream2.c' object='appender_type_stream2.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o appender_type_stream2.lo appender_type_stream2.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c appender_type_stream2.c -fPIC -DPIC -o .libs/appender_type_stream2.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c appender_type_stream2.c -o appender_type_stream2.o >/dev/null 2>&1 source='appender_type_syslog.c' object='appender_type_syslog.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o appender_type_syslog.lo appender_type_syslog.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c appender_type_syslog.c -fPIC -DPIC -o .libs/appender_type_syslog.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c appender_type_syslog.c -o appender_type_syslog.o >/dev/null 2>&1 source='appender_type_mmap.c' object='appender_type_mmap.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o appender_type_mmap.lo appender_type_mmap.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c appender_type_mmap.c -fPIC -DPIC -o .libs/appender_type_mmap.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c appender_type_mmap.c -o appender_type_mmap.o >/dev/null 2>&1 source='layout_type_basic.c' object='layout_type_basic.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o layout_type_basic.lo layout_type_basic.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c layout_type_basic.c -fPIC -DPIC -o .libs/layout_type_basic.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c layout_type_basic.c -o layout_type_basic.o >/dev/null 2>&1 source='layout_type_dated.c' object='layout_type_dated.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o layout_type_dated.lo layout_type_dated.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c layout_type_dated.c -fPIC -DPIC -o .libs/layout_type_dated.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c layout_type_dated.c -o layout_type_dated.o >/dev/null 2>&1 source='layout_type_basic_r.c' object='layout_type_basic_r.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o layout_type_basic_r.lo layout_type_basic_r.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c layout_type_basic_r.c -fPIC -DPIC -o .libs/layout_type_basic_r.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c layout_type_basic_r.c -o layout_type_basic_r.o >/dev/null 2>&1 source='layout_type_dated_r.c' object='layout_type_dated_r.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o layout_type_dated_r.lo layout_type_dated_r.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c layout_type_dated_r.c -fPIC -DPIC -o .libs/layout_type_dated_r.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c layout_type_dated_r.c -o layout_type_dated_r.o >/dev/null 2>&1 source='version.c' object='version.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o version.lo version.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c version.c -fPIC -DPIC -o .libs/version.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c version.c -o version.o >/dev/null 2>&1 source='logging_event.c' object='logging_event.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o logging_event.lo logging_event.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c logging_event.c -fPIC -DPIC -o .libs/logging_event.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c logging_event.c -o logging_event.o >/dev/null 2>&1 source='priority.c' object='priority.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o priority.lo priority.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c priority.c -fPIC -DPIC -o .libs/priority.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c priority.c -o priority.o >/dev/null 2>&1 source='appender.c' object='appender.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o appender.lo appender.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c appender.c -fPIC -DPIC -o .libs/appender.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c appender.c -o appender.o >/dev/null 2>&1 source='layout.c' object='layout.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o layout.lo layout.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c layout.c -fPIC -DPIC -o .libs/layout.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c layout.c -o layout.o >/dev/null 2>&1 source='category.c' object='category.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o category.lo category.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c category.c -fPIC -DPIC -o .libs/category.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c category.c -o category.o >/dev/null 2>&1 source='appender_type_rollingfile.c' object='appender_type_rollingfile.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o appender_type_rollingfile.lo appender_type_rollingfile.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c appender_type_rollingfile.c -fPIC -DPIC -o .libs/appender_type_rollingfile.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c appender_type_rollingfile.c -o appender_type_rollingfile.o >/dev/null 2>&1 source='rollingpolicy.c' object='rollingpolicy.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o rollingpolicy.lo rollingpolicy.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c rollingpolicy.c -fPIC -DPIC -o .libs/rollingpolicy.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c rollingpolicy.c -o rollingpolicy.o >/dev/null 2>&1 source='rollingpolicy_type_sizewin.c' object='rollingpolicy_type_sizewin.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ /bin/sh ../../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH="\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\"" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o rollingpolicy_type_sizewin.lo rollingpolicy_type_sizewin.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c rollingpolicy_type_sizewin.c -fPIC -DPIC -o .libs/rollingpolicy_type_sizewin.o ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOG4C_RCPATH=\"/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/etc\" -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c rollingpolicy_type_sizewin.c -o rollingpolicy_type_sizewin.o >/dev/null 2>&1 /bin/sh ../../libtool --tag=CC --mode=link arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -version-info 4:0:1 -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib -o liblog4c.la -rpath /home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/lib rc.lo init.lo appender_type_stream.lo appender_type_stream2.lo appender_type_syslog.lo appender_type_mmap.lo layout_type_basic.lo layout_type_dated.lo layout_type_basic_r.lo layout_type_dated_r.lo version.lo logging_event.lo priority.lo appender.lo layout.lo category.lo appender_type_rollingfile.lo rollingpolicy.lo rollingpolicy_type_sizewin.lo ../sd/liblog4c_sd.la -lpthread arm-xscale-linux-gnueabi-gcc -shared .libs/rc.o .libs/init.o .libs/appender_type_stream.o .libs/appender_type_stream2.o .libs/appender_type_syslog.o .libs/appender_type_mmap.o .libs/layout_type_basic.o .libs/layout_type_dated.o .libs/layout_type_basic_r.o .libs/layout_type_dated_r.o .libs/version.o .libs/logging_event.o .libs/priority.o .libs/appender.o .libs/layout.o .libs/category.o .libs/appender_type_rollingfile.o .libs/rollingpolicy.o .libs/rollingpolicy_type_sizewin.o -Wl,--whole-archive ../sd/.libs/liblog4c_sd.a -Wl,--no-whole-archive -Wl,--rpath -Wl,/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib -Wl,--rpath -Wl,/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib /home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib/libexpat.so -lpthread -Wl,-soname -Wl,liblog4c.so.3 -o .libs/liblog4c.so.3.1.0 ../../libtool: line 4553: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address (cd .libs && rm -f liblog4c.so.3 && ln -s liblog4c.so.3.1.0 liblog4c.so.3) (cd .libs && rm -f liblog4c.so && ln -s liblog4c.so.3.1.0 liblog4c.so) rm -fr .libs/liblog4c.lax mkdir .libs/liblog4c.lax rm -fr .libs/liblog4c.lax/liblog4c_sd.a mkdir .libs/liblog4c.lax/liblog4c_sd.a (cd .libs/liblog4c.lax/liblog4c_sd.a && arm-xscale-linux-gnueabi-ar x /home/CLi/develop/log4c/log4c-1.2.1/src/log4c/../sd/.libs/liblog4c_sd.a) ../../libtool: line 691: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-ar: Bad address ../../libtool: line 692: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-ar: Bad address arm-xscale-linux-gnueabi-ar cru .libs/liblog4c.a rc.o init.o appender_type_stream.o appender_type_stream2.o appender_type_syslog.o appender_type_mmap.o layout_type_basic.o layout_type_dated.o layout_type_basic_r.o layout_type_dated_r.o version.o logging_event.o priority.o appender.o layout.o category.o appender_type_rollingfile.o rollingpolicy.o rollingpolicy_type_sizewin.o ../../libtool: line 5963: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-ar: Bad address arm-xscale-linux-gnueabi-ranlib .libs/liblog4c.a ../../libtool: line 5963: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-ranlib: Bad address rm -fr .libs/liblog4c.lax creating liblog4c.la (cd .libs && rm -f liblog4c.la && ln -s ../liblog4c.la liblog4c.la) make[4]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src/log4c' make[4]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src' make[4]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src' make[3]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src' make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Making all in examples make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/examples' Making all in helloworld make[3]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/examples/helloworld' source='helloworld.c' object='helloworld.o' libtool=no \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c helloworld.c helloworld.c: In function 'main': helloworld.c:6:7: warning: variable 'rc' set but not used [-Wunused-but-set-variable] /bin/sh ../../libtool --tag=CC --mode=link arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib -o helloworld helloworld.o ../../src/log4c/liblog4c.la -lpthread mkdir .libs arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -o .libs/helloworld helloworld.o -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib ../../src/log4c/.libs/liblog4c.so /home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib/libexpat.so -lpthread -Wl,--rpath -Wl,/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/lib -Wl,--rpath -Wl,/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib ../../libtool: line 5234: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address creating helloworld make[3]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/examples/helloworld' Making all in helloworld1 make[3]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/examples/helloworld1' source='helloworld1.c' object='helloworld1.o' libtool=no \ DEPDIR=.deps depmode=none /bin/sh ../../config/depcomp \ arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c helloworld1.c /bin/sh ../../libtool --tag=CC --mode=link arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib -o helloworld1 helloworld1.o ../../src/log4c/liblog4c.la -lpthread mkdir .libs arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -o .libs/helloworld1 helloworld1.o -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib ../../src/log4c/.libs/liblog4c.so /home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib/libexpat.so -lpthread -Wl,--rpath -Wl,/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/lib -Wl,--rpath -Wl,/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib ../../libtool: line 5234: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address creating helloworld1 make[3]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/examples/helloworld1' make[3]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/examples' source='example_formatters.c' object='example_formatters.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../config/depcomp \ /bin/sh ../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../src -I../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o example_formatters.lo example_formatters.c mkdir .libs arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../src -I../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c example_formatters.c -fPIC -DPIC -o .libs/example_formatters.o ../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../src -I../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c example_formatters.c -o example_formatters.o >/dev/null 2>&1 source='example_appenders.c' object='example_appenders.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../config/depcomp \ /bin/sh ../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../src -I../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o example_appenders.lo example_appenders.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../src -I../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c example_appenders.c -fPIC -DPIC -o .libs/example_appenders.o ../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../src -I../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c example_appenders.c -o example_appenders.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CC --mode=link arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib -o liblog4c_examples.la example_formatters.lo example_appenders.lo -lpthread arm-xscale-linux-gnueabi-ar cru .libs/liblog4c_examples.a .libs/example_formatters.o .libs/example_appenders.o ../libtool: line 5963: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-ar: Bad address arm-xscale-linux-gnueabi-ranlib .libs/liblog4c_examples.a ../libtool: line 5963: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-ranlib: Bad address creating liblog4c_examples.la (cd .libs && rm -f liblog4c_examples.la && ln -s ../liblog4c_examples.la liblog4c_examples.la) source='userloc_formatter.c' object='userloc_formatter.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../config/depcomp \ /bin/sh ../libtool --tag=CC --mode=compile arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../src -I../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c -o userloc_formatter.lo userloc_formatter.c arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../src -I../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c userloc_formatter.c -fPIC -DPIC -o .libs/userloc_formatter.o ../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../src -I../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c userloc_formatter.c -o userloc_formatter.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CC --mode=link arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib -o liblog4c_userloc.la userloc_formatter.lo -lpthread arm-xscale-linux-gnueabi-ar cru .libs/liblog4c_userloc.a .libs/userloc_formatter.o ../libtool: line 5963: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-ar: Bad address arm-xscale-linux-gnueabi-ranlib .libs/liblog4c_userloc.a ../libtool: line 5963: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-ranlib: Bad address creating liblog4c_userloc.la (cd .libs && rm -f liblog4c_userloc.la && ln -s ../liblog4c_userloc.la liblog4c_userloc.la) source='application_1.c' object='application_1.o' libtool=no \ DEPDIR=.deps depmode=none /bin/sh ../config/depcomp \ arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../src -I../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c application_1.c /bin/sh ../libtool --tag=CC --mode=link arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib -o application_1 application_1.o ../src/log4c/liblog4c.la -lpthread arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -o .libs/application_1 application_1.o -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib ../src/log4c/.libs/liblog4c.so /home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib/libexpat.so -lpthread -Wl,--rpath -Wl,/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/lib -Wl,--rpath -Wl,/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib ../libtool: line 5234: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address creating application_1 source='application_2.c' object='application_2.o' libtool=no \ DEPDIR=.deps depmode=none /bin/sh ../config/depcomp \ arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../src -I../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c application_2.c /bin/sh ../libtool --tag=CC --mode=link arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib -o application_2 application_2.o liblog4c_examples.la ../src/log4c/liblog4c.la -lpthread arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -o .libs/application_2 application_2.o -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib ./.libs/liblog4c_examples.a ../src/log4c/.libs/liblog4c.so /home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib/libexpat.so -lpthread -Wl,--rpath -Wl,/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/lib -Wl,--rpath -Wl,/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib ../libtool: line 5234: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address creating application_2 source='application_3.c' object='application_3.o' libtool=no \ DEPDIR=.deps depmode=none /bin/sh ../config/depcomp \ arm-xscale-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I../src -I../src -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -c application_3.c /bin/sh ../libtool --tag=CC --mode=link arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib -o application_3 application_3.o liblog4c_userloc.la liblog4c_examples.la ../src/log4c/liblog4c.la -lpthread arm-xscale-linux-gnueabi-gcc -I/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/include -Wall -o .libs/application_3 application_3.o -L/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib ./.libs/liblog4c_userloc.a ./.libs/liblog4c_examples.a ../src/log4c/.libs/liblog4c.so /home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib/libexpat.so -lpthread -Wl,--rpath -Wl,/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/lib -Wl,--rpath -Wl,/home/CLi/develop/crosstool-ng/x-tools/armxscaleexpat/lib ../libtool: line 5234: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address creating application_3 make[3]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/examples' make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/examples' make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1' make[2]: Nothing to be done for `all-am'. make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1' make[1]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1' CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $
5.再去安装，结果出错：
CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $ make install make install-recursive make[1]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1' Making install in config make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/config' make[3]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/config' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/config' make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/config' Making install in src make[2]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Making install in sd make[3]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' make[4]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' make[3]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src/sd' Making install in log4c make[3]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src/log4c' make[4]: Entering directory `/home/CLi/develop/log4c/log4c-1.2.1/src/log4c' test -z "/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/lib" || /usr/bin/mkdir -p "/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/lib" /bin/sh ../../libtool --mode=install /usr/bin/install -c 'liblog4c.la' '/home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/lib/liblog4c.la' /usr/bin/install -c .libs/liblog4c.so.3.1.0 /home/CLi/develop/crosstool-ng/x-tools/armxscalelog4c/lib/liblog4c.so.3.1.0 /usr/bin/install: cannot stat `.libs/liblog4c.so.3.1.0': No such file or directory Makefile:295: recipe for target `install-libLTLIBRARIES' failed make[4]: *** [install-libLTLIBRARIES] Error 1 make[4]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src/log4c' Makefile:481: recipe for target `install-am' failed make[3]: *** [install-am] Error 2 make[3]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src/log4c' Makefile:277: recipe for target `install-recursive' failed make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1/src' Makefile:338: recipe for target `install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/home/CLi/develop/log4c/log4c-1.2.1' Makefile:614: recipe for target `install' failed make: *** [install] Error 2
即：
| /usr/bin/install: cannot stat `.libs/liblog4c.so.3.1.0′: No such file or directory |
说明对应的liblog4c.so.3.1.0，没有正常生成。
7.看来，还是需要去解决上面的bad address的问题。
再去make clean一下。
重启cygwin，确保当前没有多余的，之前导出的export变量：
CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $ echo $PATH /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin:/opt/crosstool-ng/bin:/home/CLi/develop/crosstool-ng/x-tools/armxscalecurl/bin:/usr/local/bin:/usr/bin:/cygdrive/d/tmp/dev_install_root/Python27_x64:/cygdrive/d/tmp/dev_install_root/Python27_x64/Lib/site-packages/PyQt4:/cygdrive/d/tmp/dev_install_root/Perl64/site/bin:/cygdrive/d/tmp/dev_install_root/Perl64/bin:/cygdrive/c/Program Files/Common Files/Microsoft Shared/Windows Live:/cygdrive/c/Program Files (x86)/Common Files/Microsoft Shared/Windows Live:/cygdrive/c/Windows/system32:/cygdrive/c/Windows:/cygdrive/c/Windows/System32/Wbem:/cygdrive/c/Windows/System32/WindowsPowerShell/v1.0:/cygdrive/c/Program Files (x86)/Microsoft SQL Server/100/Tools/Binn:/cygdrive/c/Program Files/Microsoft SQL Server/100/Tools/Binn:/cygdrive/c/Program Files/Microsoft SQL Server/100/DTS/Binn:/cygdrive/d/tmp/WordPress/mysql/mysql-5.5.18/MySQL/MySQL Server 5.5/bin:/cygdrive/d/tmp/WordPress/DevRoot/MySQL/MySQL Server 5.5/bin:/cygdrive/d/tmp/WordPress/DevRoot/php-5.3.6-Win32-VC9-x64:/cygdrive/d/tmp/WordPress/DevRoot/php-5.3.6-Win32-VC9-x64/ext:/cygdrive/d/tmp/WordPress/DevRoot/Python27:/cygdrive/c/Program Files (x86)/Common Files/Acronis/SnapAPI:/cygdrive/c/Program Files (x86)/Windows Live/Shared:/cygdrive/c/Program Files/Java/jdk1.7.0_11/bin:/home/CLi/develop/docbook/tools/fop/lib:/home/CLi/develop/docbook/tools/fop:/cygdrive/d/DevInstallRoot/FF/DD_IDE_1.1.2/TOK/BIN:/cygdrive/d/DevInstallRoot/FF/DD_IDE_1.2.0/TOK/BIN:/cygdrive/d/DevRoot/EmbeddedDevelop/trunk/Research/CLI/FF/FBK/develop/tools/develop-tools:/cygdrive/d/tmp/WordPress/DevRoot/Python27/Scripts:/cygdrive/d/tmp/dev_install_root/PostgreSQL/8.3/bin:/cygdrive/d/tmp/dev_install_root/ant/apache-ant-1.8.4/bin:/cygdrive/c/Program Files/nodejs:/cygdrive/c/Program Files/Microsoft/Web Platform Installer:/cygdrive/c/Program Files/TortoiseSVN/bin:/cygdrive/d/DevRoot/IndustrialMobileAutomation/HandheldDataSetter/ANTLR/batchFile:/cygdrive/c/Program Files (x86)/QuickTime/QTSystem:/cygdrive/d/tmp/tmp_dev_root/android/adt-bundle-windows/sdk/platform-tools:/cygdrive/d/tmp/dev_install_root/Tesseract-OCR:/cygdrive/d/tmp/dev_install_root/jython2.5.3/bin:/cygdrive/d/devinstallroot/gnuarm/bin:/cygdrive/d/tmp/dev_install_root/HTML Help Workshop:/cygdrive/c/Users/CLi/AppData/Roaming/npm:/usr/lib/lapack CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $ echo $LDFLAGS CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $ echo $CFLAGS CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $
重新去配置：
./configure --prefix=$HOME/develop/crosstool-ng/x-tools/armxscalelog4c --build=i686-pc-cygwin --target=arm-xscale-linux-gnueabi --host=arm-xscale-linux-gnueabi --with-expat-prefix=$HOME/develop/crosstool-ng/x-tools/armxscaleexpat CC=arm-xscale-linux-gnueabi-gcc
CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $ ./configure --prefix=$HOME/develop/crosstool-ng/x-tools/armxscalelog4c --build=i686-pc-cygwin --target=arm-xscale-linux-gnueabi --host=arm-xscale-linux-gnueabi --with-expat-prefix=$HOME/develop/crosstool-ng/x-tools/armxscaleexpat CC=arm-xscale-linux-gnueabi-gcc checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for arm-xscale-linux-gnueabi-strip... arm-xscale-linux-gnueabi-strip checking build system type... i686-pc-cygwin checking host system type... arm-xscale-linux-gnueabi checking for bison... bison -y checking for arm-xscale-linux-gnueabi-gcc... arm-xscale-linux-gnueabi-gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... yes checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-xscale-linux-gnueabi-gcc accepts -g... yes checking for arm-xscale-linux-gnueabi-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of arm-xscale-linux-gnueabi-gcc... gcc3 checking how to run the C preprocessor... arm-xscale-linux-gnueabi-gcc -E checking for flex... flex checking lex output file root... lex.yy checking lex library... none needed checking whether yytext is a pointer... no checking for gawk... (cached) gawk checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for arm-xscale-linux-gnueabi-ranlib... arm-xscale-linux-gnueabi-ranlib checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ld used by arm-xscale-linux-gnueabi-gcc... /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe checking if the linker (/home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe) is GNU ld... yes checking for /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe option to reload object files... -r checking for BSD-compatible nm... /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-nm -B checking how to recognise dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for arm-xscale-linux-gnueabi-g++... arm-xscale-linux-gnueabi-g++ checking whether we are using the GNU C++ compiler... yes checking whether arm-xscale-linux-gnueabi-g++ accepts -g... yes checking dependency style of arm-xscale-linux-gnueabi-g++... gcc3 checking how to run the C++ preprocessor... arm-xscale-linux-gnueabi-g++ -E checking for arm-xscale-linux-gnueabi-g77... no checking for arm-xscale-linux-gnueabi-xlf... no checking for arm-xscale-linux-gnueabi-f77... no checking for arm-xscale-linux-gnueabi-frt... no checking for arm-xscale-linux-gnueabi-pgf77... no checking for arm-xscale-linux-gnueabi-cf77... no checking for arm-xscale-linux-gnueabi-fort77... no checking for arm-xscale-linux-gnueabi-fl32... no checking for arm-xscale-linux-gnueabi-af77... no checking for arm-xscale-linux-gnueabi-xlf90... no checking for arm-xscale-linux-gnueabi-f90... no checking for arm-xscale-linux-gnueabi-pgf90... no checking for arm-xscale-linux-gnueabi-pghpf... no checking for arm-xscale-linux-gnueabi-epcf90... no checking for arm-xscale-linux-gnueabi-gfortran... no checking for arm-xscale-linux-gnueabi-g95... no checking for arm-xscale-linux-gnueabi-xlf95... no checking for arm-xscale-linux-gnueabi-f95... no checking for arm-xscale-linux-gnueabi-fort... no checking for arm-xscale-linux-gnueabi-ifort... no checking for arm-xscale-linux-gnueabi-ifc... no checking for arm-xscale-linux-gnueabi-efc... no checking for arm-xscale-linux-gnueabi-pgf95... no checking for arm-xscale-linux-gnueabi-lf95... no checking for arm-xscale-linux-gnueabi-ftn... no checking for g77... g77 configure: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to [email protected]. checking whether we are using the GNU Fortran 77 compiler... yes checking whether g77 accepts -g... yes checking the maximum length of command line arguments... 8192 checking command to parse /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-nm -B output from arm-xscale-linux-gnueabi-gcc object... ok checking for objdir... .libs checking for arm-xscale-linux-gnueabi-ar... arm-xscale-linux-gnueabi-ar checking for arm-xscale-linux-gnueabi-ranlib... (cached) arm-xscale-linux-gnueabi-ranlib checking for arm-xscale-linux-gnueabi-strip... (cached) arm-xscale-linux-gnueabi-strip checking for correct ltmain.sh version... yes checking if arm-xscale-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no checking for arm-xscale-linux-gnueabi-gcc option to produce PIC... -fPIC checking if arm-xscale-linux-gnueabi-gcc PIC flag -fPIC works... yes checking if arm-xscale-linux-gnueabi-gcc static flag -static works... yes checking if arm-xscale-linux-gnueabi-gcc supports -c -o file.o... yes checking whether the arm-xscale-linux-gnueabi-gcc linker (/home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by arm-xscale-linux-gnueabi-g++... /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe checking if the linker (/home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe) is GNU ld... yes checking whether the arm-xscale-linux-gnueabi-g++ linker (/home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe) supports shared libraries... yes checking for arm-xscale-linux-gnueabi-g++ option to produce PIC... -fPIC checking if arm-xscale-linux-gnueabi-g++ PIC flag -fPIC works... yes checking if arm-xscale-linux-gnueabi-g++ static flag -static works... yes checking if arm-xscale-linux-gnueabi-g++ supports -c -o file.o... yes checking whether the arm-xscale-linux-gnueabi-g++ linker (/home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for g77 option to produce PIC... -fPIC checking if g77 PIC flag -fPIC works... no checking if g77 static flag -static works... yes checking if g77 supports -c -o file.o... yes checking whether the g77 linker (/home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/arm-xscale-linux-gnueabi/bin/ld.exe) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for pthread_mutex_init in -lpthread... yes configure: Compile with rollingfile code checking for ANSI C header files... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for inttypes.h... (cached) yes checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for unistd.h... (cached) yes checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking varargs.h usability... no checking varargs.h presence... no checking for varargs.h... no checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking for pthread.h... (cached) yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for working alloca.h... yes checking for alloca... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... no checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for getpagesize... yes checking for working mmap... no checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... no checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking whether utime accepts a null argument... no checking for vprintf... yes checking for _doprnt... no checking for gettimeofday... yes checking for memset... yes checking for munmap... yes checking for nl_langinfo... yes checking for strdup... yes checking for strerror... yes checking for strncasecmp... yes checking for strrchr... yes checking for strstr... yes checking for utime... yes checking for sbrk... yes checking for doxygen... /usr/bin/doxygen checking for dot... no checking for latex... /usr/bin/latex checking for EXPAT - version >= 1.95.1... cross compiling; assumed OK... yes configure: creating ./config.status config.status: creating Makefile config.status: creating log4c-config config.status: creating log4crc.sample config.status: creating log4c.spec config.status: creating config/Makefile config.status: creating doc/Makefile config.status: creating doc/Doxyfile config.status: creating doc/main.doc config.status: creating src/Makefile config.status: creating src/log4c/Makefile config.status: creating src/log4c/version.h config.status: creating src/sd/Makefile config.status: creating tests/Makefile config.status: creating tests/log4c/Makefile config.status: creating examples/Makefile config.status: creating examples/log4crc config.status: creating examples/helloworld/Makefile config.status: creating examples/helloworld1/Makefile config.status: creating src/config.h config.status: src/config.h is unchanged config.status: executing depfiles commands config.status: executing default commands CLi@PC-CLI-1 ~/develop/log4c/log4c-1.2.1 $
再去编译，终于可以正常编译了，也没了bad address了。
【总结】
至此，真正的解决此问题了：
当出现
| ../../libtool: line 1326: /home/CLi/develop/crosstool-ng/x-tools/arm-xscale-linux-gnueabi/bin/arm-xscale-linux-gnueabi-gcc: Bad address |
时，此处的原因是：
不知道之前的那个参数配置，以及export的环境变量，而导致不知情况的异常，而导致gcc等工具出行bad address，而当：
彻底的make clean后 -> 确保之前没有残余任何东西
重启cygwin->确保之前export的一些变量，不会影响
重新配置，加上对应的–with-expat-prefix的参数：
./configure --prefix=$HOME/develop/crosstool-ng/x-tools/armxscalelog4c --build=i686-pc-cygwin --target=arm-xscale-linux-gnueabi --host=arm-xscale-linux-gnueabi --with-expat-prefix=$HOME/develop/crosstool-ng/x-tools/armxscaleexpat CC=arm-xscale-linux-gnueabi-gcc
然后再继续make，终于可以：
正常的编译了。
之后，会出现，意料中的：
转载请注明：在路上 » 【已解决】Cygwin下用arm-xscale-linux-gnueabi交叉编译log4c出错：libtool: line 1326: xxx/bin/arm-xscale-linux-gnueabi-gcc: Bad address