【背景】
之前折腾：
【记录】订阅crosstool-ng即crossgcc的邮件列表（mailing list）
而后来，实际上发现，已经是注册该mailing list成功了。
因为基本上每天都可以收到对应的crossgcc Digest了：
然后此处，看到一个人问的一个问题：
MIME-Version: 1.0 Hello. I have downloaded the latest version of the tool aka 1.18. I’ve In my first iteration I encountered an error build the mfpr library Later my build failed during the kernel header installation phase (as Having done that, the ‘Installing kernel headers’ phase went fine. [ALL ] /usr/bin/make subdir=manual -C manual ..=../ install-headers This one is again the same problem encountered before. I could again Now I want to know whether this is the case for everyone or am I doing I am really stumped on this one. Keen to hear your suggestions, replies etc. Regards. |
其是我之前就遇到并解决的：
该帖子，对应的网址是：
http://cygwin.com/ml/crossgcc/2013-08/
中的：
cannot build crosstool due to Makefile issues (mixed implicit and normal rules)
此处希望：
在我已经注册该mailing list的前提下：
如何才能回复该mailing list中的（单个）帖子（好像叫做thread？）
（注，搞懂了此问题后，抽空也想去回复：
Crosstool Build Fails under cygwin
的问题的）
【折腾过程】
1.去参考：
Email Etiquette: Replying to Mailing Lists
how do you reply to a mailing list message?
去看看。
然后可以看到，此处的Message-ID是：
| CAOYrRwqd+Lk+1Sr1BEAQm+QzeX0TfQ2dE4wOPFqAmmFkypuYZw@mail.gmail.com |
但是，貌似没有详细的解释，如何回复特定的mailing list中的帖子。
2.参考：
Re: Replying to a mailing list thread
中的：
RE: Replying to a mailing list thread
中的解释，去试试：
对于帖子：
http://cygwin.com/ml/crossgcc/2013-08/msg00047.html
去点击对应的Raw Text：
打开的地址是：
http://cygwin.com/cgi-bin/get-raw-msg?listname=crossgcc&date=2013-08&msgid=CAOYrRwqd%2BLk%2B1Sr1BEAQm%2BQzeX0TfQ2dE4wOPFqAmmFkypuYZw%40mail.gmail.com
对应的内容是：
From crossgcc-return-21512-listarch-crossgcc=sources dot redhat dot com at sourceware dot org Fri Aug 30 00:18:51 2013 Return-Path: <crossgcc-return-21512-listarch-crossgcc=sources dot redhat dot com at sourceware dot org> Delivered-To: listarch-crossgcc at sources dot redhat dot com Received: (qmail 18293 invoked by alias); 30 Aug 2013 00:18:51 -0000 Mailing-List: contact crossgcc-help at sourceware dot org; run by ezmlm Precedence: bulk List-Id: <crossgcc.sourceware.org> List-Subscribe: <mailto:crossgcc-subscribe at sourceware dot org> List-Archive: <http://sourceware.org/ml/crossgcc/> List-Post: <mailto:crossgcc at sourceware dot org> List-Help: <mailto:crossgcc-help at sourceware dot org>, <http://sourceware dot org/ml/#faqs> Sender: crossgcc-owner at sourceware dot org Delivered-To: mailing list crossgcc at sourceware dot org Received: (qmail 18283 invoked by uid 89); 30 Aug 2013 00:18:50 -0000 Received: from mail-vb0-f67.google.com (HELO mail-vb0-f67.google.com) (209.85.212.67) by sourceware.org (qpsmtpd/0.93/v0.84-503-g423c35a) with (AES128-SHA encrypted) ESMTPS; Fri, 30 Aug 2013 00:18:50 +0000 Authentication-Results: sourceware.org; auth=none X-Virus-Found: No X-Spam-SWARE-Status: No, score=-1.8 required=5.0 tests=AWL,BAYES_00,FREEMAIL_FROM,NO_RELAYS autolearn=ham version=3.3.2 X-HELO: mail-vb0-f67.google.com Received: by mail-vb0-f67.google.com with SMTP id g17so157619vbg.2 for <[email protected]>; Thu, 29 Aug 2013 17:18:48 -0700 (PDT) MIME-Version: 1.0 X-Received: by 10.220.16.73 with SMTP id n9mr3550731vca.24.1377821927114; Thu, 29 Aug 2013 17:18:47 -0700 (PDT) Received: by 10.58.28.239 with HTTP; Thu, 29 Aug 2013 17:18:47 -0700 (PDT) Date: Fri, 30 Aug 2013 05:48:47 +0530 Message-ID: <CAOYrRwqd+Lk+1Sr1BEAQm+QzeX0TfQ2dE4wOPFqAmmFkypuYZw@mail.gmail.com> Subject: cannot build crosstool due to Makefile issues (mixed implicit and normal rules) From: Aijaz Baig <aijazbaig1 dot new at gmail dot com> To: crossgcc at sourceware dot org Content-Type: text/plain; charset=ISO-8859-1 Hello. I have downloaded the latest version of the tool aka 1.18. I've configured it for powerpc-unknown-nofpu-linux-gnu. ... ... |
找到对应的：
From crossgcc-return-21512-listarch-crossgcc=sources dot redhat dot com at sourceware dot org Fri Aug 30 00:18:51 2013 Return-Path: <crossgcc-return-21512-listarch-crossgcc=sources dot redhat dot com at sourceware dot org> Message-ID: <CAOYrRwqd+Lk+1Sr1BEAQm+QzeX0TfQ2dE4wOPFqAmmFkypuYZw@mail.gmail.com> Subject: cannot build crosstool due to Makefile issues (mixed implicit and normal rules)
然后，去把对应的Return-Path的值中的dot改为字符点’.’，把at改为字符‘@’，即为：
crossgcc-return-21512-listarch-crossgcc=sources.redhat.com@sourceware.org
然后去给该邮件地址，发一封空邮件：
看看能否收到之前的那个帖子的内容。
结果是系统退信：
3.但是注意到是，我用的是green-waste发送的邮件，而不是我刚才的admin的。
看来是由于163，自动把crifan的mail换成了163的
所以，重新去试试，且加上之前的标题试试。
且注意到那人的解释，实际上，对于：
<crossgcc-return-21512-listarch-crossgcc=sources dot redhat dot com at sourceware dot org>
即：
| crossgcc-return-21512-listarch-crossgcc=sources.redhat.com@sourceware.org |
其DECIMALNUMBER是21512，所以，应该发邮件给：
[email protected]
（或者是： [email protected]？）
先去试试给[email protected]，发个空邮件，且加上标题：
cannot build crosstool due to Makefile issues (mixed implicit and normal rules)
即：
然后看看结果如何。
此处，163中，可以确认，这个空邮件，已经发送成功，到达对方服务器了：
但是，貌似等了好一会了，都没回复啊。。。。
4.算了，重新给另外那个地址：
去也发一个试试，同时也加上对应标题：
看看结果如何。
结果也是没回音。
貌似此法没用啊。
5.参考：
Re: Replying to a mailing list thread
的解释，去试试：
找到Message-ID是：
CAOYrRwqd+Lk+1Sr1BEAQm+QzeX0TfQ2dE4wOPFqAmmFkypuYZw@mail.gmail.com
然后，打算去给此邮件地址，发送邮件且设置标题的，但是再看了另外一个回复：
Re: Replying to a mailing list thread
后，就晕了。还是不去参考其办法了。
6.参考：
How to participate in mailing list I’m receiving as digest?
但是无有效参考价值。
7.自己看着帖子：
http://gcc.gnu.org/ml/gcc/2008-02/msg00029.html
以及其raw text，自己去尝试找到内部的逻辑吧。
（1）收件人Mail to
看到其：
To: "Rodrigo Dominguez" <rdomingu at ece dot neu dot edu>
对应的是raw text是：
To: "Rodrigo Dominguez" <rdomingu at ece dot neu dot edu>
没变化。
所以，我此处要回复的地址，应该也是该帖子的作者才对，即：
http://cygwin.com/ml/crossgcc/2013-08/msg00047.html
中的：
From: Aijaz Baig <aijazbaig1 dot new at gmail dot com>
中的：
aijazbaig1 dot new at gmail dot com
即：
[email protected]
所以，邮件的收件人中，应该就是：
[email protected]
（2）抄送人 CC
http://gcc.gnu.org/ml/gcc/2008-02/msg00019.html
中，有cc抄送：
Cc: gcc at gcc dot gnu dot org
所以，此处，自己发邮件的话，也应该有CC抄送。
而且再参考别的，某人回复某人的帖子：
http://gcc.gnu.org/ml/gcc/2008-02/msg00028.html
所有的CC操作，都是：
gcc at gcc dot gnu dot org
即：
[email protected]
即该mailing list的邮件地址：
所以推测：
所有的帖子，回复别人的已有的帖子，CC的地址，都是mailing list的地址。
所以，此处，CC，即抄送人中，应该写上此处的mailing list的地址，即：
http://cygwin.com/ml/crossgcc/2013-08/msg00047.html
中的：
To: crossgcc at sourceware dot org
中的：
crossgcc at sourceware dot org
即：
[email protected]
（3）主题Subject
http://gcc.gnu.org/ml/gcc/2008-02/msg00029.html
中的是：
Subject: Re: Replying to a mailing list thread
所以，主题的值，应该是：
Re: Replying to a mailing list thread
即：
所要回复的帖子的，最原始的标题。
而此处的要回复的帖子是：
http://cygwin.com/ml/crossgcc/2013-08/msg00047.html
中的：
cannot build crosstool due to Makefile issues (mixed implicit and normal rules)
所以，此处，主题中，应该写上：
Re加上冒号，加上一个空格，加上原始标题，即：
Re: cannot build crosstool due to Makefile issues (mixed implicit and normal rules)
（4）引用References
对于：
http://gcc.gnu.org/ml/gcc/2008-02/msg00029.html
中的：
References: <[email protected]> [email protected]
没有搞懂。
（5）回复的内容主题
之前就看到，其回复的效果是：
On Sat, 2 Feb 2008, Hans-Peter Nilsson wrote: > On Sat, 2 Feb 2008, Rodrigo Dominguez wrote: > > > xxx > > xxx > > xxx > xxx xxxxx
而此处，看来目前只能手动输入自己的内容，然后加上之前别人的已有内容，再加上大于号，加上对应的缩进了。
而对于要回复的原始内容，可以从网页中：
http://cygwin.com/ml/crossgcc/2013-08/msg00047.html
也可以从之前收到的邮件中的附件：crossgcc_21512.ezm
中直接拷贝出来。
回复的内容，目前写成：
I have encounted same issue:
during step of Installing kernel headers, got error:
Makefile:119: recipe for target `headers_install’ failed
and, your concern about "kernel might be full of such old fashioned makefiles" is same with me,
so, finnaly, I fix this error by:
change make from v3.82 to v3.81
and most important is:
actually the crosstool-ng, have realized this issue,
so, you can find the solution for this issue in:
crosstool-ng-1.18.0\docs\B – Known issues.txt
which is:
"""
--------------------------------
Symptoms:
glibc start files and headers fail with: [/usr/include/limits.h] Error 1
Explanations:
Old glibc (and eglibc) Makefiles break with make-3.82.
Status:
CURRENT
Fix:
None so far. It would require some glibc/eglibc hacking.
Workaround:
There two possible workarounds:
1- ask crosstool-NG to build make-3.81 just for this build session:
Select the following options:
Paths and misc options --->
[*] Try features marked as EXPERIMENTAL
Companion tools --->
[*] Build some companion tools
[*] make
2- manually install make-3.81 to take precedence over the system make.
--------------------------------
Symptoms:
The build fails with "mixed implicit and normal rules. Stop."
Explanations:
Old glibc (and eglibc) Makefiles break with make-3.82.
Status:
CURRENT
Fix:
None so far. See above issue.
Workaround:
See above issue.
--------------------------------
"""
so, final solution for:
Makefile:xxx: *** mixed implicit and normal rules. Stop.
is:
in ct-nt menuconfig, choose crosstool-ng's v3.81 make
steps:
ct-nt menuconfig
->
Paths and misc options --->
select:
[*] Try features marked as EXPERIMENTAL
->
then goto:
Companion tools --->
select:
[*] Build some companion tools
then can choose:
[*] make
that will:
let crosstool-ng, use its v3.81, instead of your v3.82 make of your environment
to do make, this will avoid possibly, many such kind of "mixed implicit and normal rules. Stop" in following build.
Crifan Li
> Hello.
>
> I have downloaded the latest version of the tool aka 1.18. I've
> configured it for powerpc-unknown-nofpu-linux-gnu.
>
> In my first iteration I encountered an error build the mfpr library
> and on searching the internet came across a similar issue by a user
> earlier in which Yann advised the fellow to manually upgrade his mfpvr
> library. Hence a quick menuconfig later in which I selected a higher
> version of mfpr, this issue seemed to have ceased.
>
> Later my build failed during the kernel header installation phase (as
> part of Installing pass-1 core C compiler) and on probing build.log
> realized that it is due to the concerned Makefile (within
> arch/powerpc/kernel/) having a format which the newer makefile on my
> machine (version 3.82) does not like. Now I believe the kernel might
> be full of such old fashioned makefiles so I switched to a newer
> kernel (2.6.36). The default was set to use 2.6.31.
>
> Having done that, the 'Installing kernel headers' phase went fine.
> However this time, it failed in the 'Installing C library headers &
> start files' phase. This is what the build.log file has to say now:
>
> [ALL ] /usr/bin/make subdir=manual -C manual ..=../ install-headers
> [ALL ] make[3]: Entering directory
> `/home/aijazbaig1/crosstoolchain/.build/src/glibc-2.9/manual'
> [ALL ] Makefile:240: *** mixed implicit and normal rules. Stop.
> [ALL ] make[3]: Leaving directory
> `/home/aijazbaig1/crosstoolchain/.build/src/glibc-2.9/manual'
> [ERROR] make[2]: *** [manual/install-headers] Error 2
>
> This one is again the same problem encountered before. I could again
> select a higher version via menuconfig and continue only to fail at
> some other step.
>
> Now I want to know whether this is the case for everyone or am I doing
> something wrong here. Do I need to downgrade my Make or use a lower
> version of Make (3.81 instead of the default 3.82 on my host)
> temporarily for this to work?
>
> I am really stumped on this one. Keen to hear your suggestions, replies etc.
>
> Regards.
> 然后去发送一下试试：
看看，是否可以在：
crossgcc archive thread index for August, 2013
http://cygwin.com/ml/crossgcc/2013-08/threads.html
过段时间，可以看到我的回复的，且是属于回复该thread的。
8.然后结果也是不行。
并且，自己想了下，貌似也不行的。
毕竟没有涉及到该post的messge id，则：
如果该人的帖子，已经被很多回复了，则我上面的操作，根本无法区分是回复哪个帖子的。
所以，还是无法实现：
回复该特定的帖子的。
9.后来看了些东西后，终于搞清楚了：
某个讨论的主题，是thread
单个的发帖，叫做message
所以去搜：
how to reply mailing list single message
参考：
How to reply to one message within a daily digest?
说是：
想要回复某个特定的message的话，需要关闭digest模式。
但是很明显，这会导致，自己的邮件，每天，都收到N多来自mailing list的帖子
很明显，是很挫的做法。
所以，坚决不用。
10.然后这人：
How to reply to one message within a daily digest?
提说是，在windows中用
Pegasus Mail for Windows
另外这人：
How to reply to one message within a daily digest?
说是windows下可以用
Agent
所以，抽空可以去试试：
Pegasus Mail for Windows
和
Agent
11.后来，点击之前收到的mailing list的digest，可以看到回复地址是：
[email protected]
所以，尝试什么都不改，回复试试：
然后（邮件被163当做垃圾邮件了，然后搜crossgcc才找到的此回复的邮件的）
收到的回复邮件是：
完整的内容是：
Hi! This is the ezmlm program. I'm managing the [email protected] mailing list. This is a generic help message. The message I received wasn't sent to any of my command addresses. --- Administrative commands for the crossgcc-digest list --- I can handle administrative requests automatically. Please do not send them to the list address! Instead, send your message to the correct command address: To subscribe to the list, send a message to: <[email protected]> To remove your address from the list, send a message to: <[email protected]> Send mail to the following for info and FAQ for this list: <[email protected]> <[email protected]> Similar addresses exist for the digest list: <[email protected]> <[email protected]> To get messages 123 through 145 (a maximum of 100 per request), mail: <[email protected]> To get an index with subject and author for messages 123-456 , mail: <[email protected]> They are always returned as sets of 100, max 2000 per request, so you'll actually get 100-499. To receive all messages with the same subject as message 12345, send an empty message to: <[email protected]> The messages do not really need to be empty, but I will ignore their content. Only the ADDRESS you send to is important. You can start a subscription for an alternate address, for example "[email protected]", just add a hyphen and your address (with '=' instead of '@') after the command word: <[email protected]> To stop subscription for this address, mail: <[email protected]> In both cases, I'll send a confirmation message to that address. When you receive it, simply reply to it to complete your subscription. If despite following these instructions, you do not get the desired results, please contact my owner at [email protected]. Please be patient, my owner is a lot slower than I am ;-) --- Enclosed is a copy of the request I received. Return-Path: <[email protected]> Received: (qmail 2669 invoked by uid 89); 30 Aug 2013 10:08:23 -0000 Received: from m13-8.163.com (HELO m13-8.163.com) (220.181.13.8) by sourceware.org (qpsmtpd/0.93/v0.84-503-g423c35a) with ESMTP; Fri, 30 Aug 2013 10:08:23 +0000 Authentication-Results: sourceware.org; auth=none X-Virus-Checked: by ClamAV 0.97.8 on sourceware.org X-Virus-Found: No X-Spam-Flag: YES X-Spam-SWARE-Status: Yes, score=7.2 required=5.0 tests=AWL,BAYES_60,HTML_MESSAGE,KHOP_THREADED,RCVD_IN_SORBS_DUL,RCVD_VIA_APNIC,RDNS_NONE,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Status: Yes, score=7.2 required=5.0 tests=AWL,BAYES_60,HTML_MESSAGE,KHOP_THREADED,RCVD_IN_SORBS_DUL,RCVD_VIA_APNIC,RDNS_NONE,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on sourceware.org X-Spam-Level: ******* X-HELO: m13-8.163.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=163.com; s=s110527; h=Received:Date:From:To:Subject:Sender:In-Reply-To: References:Content-Type:MIME-Version:Message-ID; bh=bcAofTfaU60l Xp/0H9jHQb/pfm5eBvpY2+kXoZG6LGs=; b=kZDUWa8NVYC9Y/6BtXuXkyXcLjKn gH6oB7Ehqz7XqS/EjAImnR+MSyjBc+BOXIMa25G+1JxueruxPAa5gIg8hAMXLoaZ TnMykePkWmHqUUykONHHjnl/89sbpusRHHpU3cwXNkJVfImt0GZndtEaW5l08DJf sfnrobv72VB2cIw= Received: from admin$crifan.com ( [221.224.111.74] ) by ajax-webmail-wmsvr8 (Coremail) ; Fri, 30 Aug 2013 18:08:17 +0800 (CST) X-Originating-IP: [221.224.111.74] Date: Fri, 30 Aug 2013 18:08:17 +0800 (CST) From: [email protected] To: [email protected] Subject: Re:crossgcc Digest 30 Aug 2013 00:18:51 -0000 Issue 3199 X-Priority: 3 X-Mailer: Coremail Webmail Server Version SP_ntes V3.5 build 20130709(22708.5479.5480) Copyright (c) 2002-2013 www.mailtech.cn 163com Sender: [email protected] In-Reply-To: <[email protected]> References: <[email protected]> X-CM-CTRLDATA: zmATL2Zvb3Rlcl9odG09MTMyOTo4MQ== Content-Type: multipart/alternative; boundary="----=_Part_351916_752717665.1377857297824" MIME-Version: 1.0 Message-ID: <[email protected]> X-CM-TRANSID:CMGowGC5YEISbyBSjVALAA--.24622W X-CM-SenderInfo: pjuhv0onzd23rh6rljoofrz/1tbiYxGJpVD+Ou4PoAABsK X-Coremail-Antispam: 1U5529EdanIXcx71UUUUU7vcSsGvfC2KfnxnUU== ------=_Part_351916_752717665.1377857297824 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: 7bit want to how to reply to mailing list's single message At 2013-08-30 08:18:51,[email protected] wrote: > >crossgcc Digest 30 Aug 2013 00:18:51 -0000 Issue 3199 > >Topics (messages 21510 through 21512): > >Re: Multilib error with x86_64 > 21510 by: Bandaru Viswanath > >Updating the linux kernel list, longterm kernels. > 21511 by: Jonathan Winterflood > >cannot build crosstool due to Makefile issues (mixed implicit and normal rules) > 21512 by: Aijaz Baig > >Administrivia: > >To subscribe to the digest, e-mail: > [email protected] > >To unsubscribe from the digest, e-mail: > [email protected] > >To post to the list, e-mail: > [email protected] > > >---------------------------------------------------------------------- ------=_Part_351916_752717665.1377857297824 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: 7bit <div style="line-height:1.7;color:#000000;font-size:14px;font-family:arial">want to how to reply to mailing list's single message <br><div></div><div id="divNeteaseMailCard"></div><br><pre><br>At 2013-08-30 08:18:51,[email protected] wrote: > >crossgcc Digest 30 Aug 2013 00:18:51 -0000 Issue 3199 > >Topics (messages 21510 through 21512): > >Re: Multilib error with x86_64 > 21510 by: Bandaru Viswanath > >Updating the linux kernel list, longterm kernels. > 21511 by: Jonathan Winterflood > >cannot build crosstool due to Makefile issues (mixed implicit and normal rules) > 21512 by: Aijaz Baig > >Administrivia: > >To subscribe to the digest, e-mail: > [email protected] > >To unsubscribe from the digest, e-mail: > [email protected] > >To post to the list, e-mail: > [email protected] > > >---------------------------------------------------------------------- </pre></div><br><br><span title="neteasefooter"><span id="netease_mail_footer"></span></span> ------=_Part_351916_752717665.1377857297824--
然后，从：
To receive all messages with the same subject as message 12345, send an empty message to: <[email protected]>
可以看出，对应的，想要获得thread：
http://cygwin.com/ml/crossgcc/2013-08/msg00047.html
的所有message的话，应该是：
找到该贴的thread id，然后再去发邮件。
此处，对应的那个 thread id，即
http://cygwin.com/ml/crossgcc/2013-08/msg00047.html
中点击Raw text，然后看到的：
From crossgcc-return-21512-listarch-crossgcc=sources dot redhat dot com at sourceware dot org Fri Aug 30 00:18:51 2013 Return-Path: <crossgcc-return-21512-listarch-crossgcc=sources dot redhat dot com at sourceware dot org>
中的那个数字：21512
所以，去给：
[email protected]
发邮件。
12.发之前，先要说说：
之前发给
的邮件，结果也是被人家回复出错了：
完整内容是：
Hi. This is the qmail-send program at sourceware.org. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: ezmlm-get: fatal: only subscribers can get (#5.7.1) --- Below this line is a copy of the message. Return-Path: <[email protected]> Received: (qmail 27807 invoked by uid 89); 30 Aug 2013 08:42:22 -0000 Received: from m13-8.163.com (HELO m13-8.163.com) (220.181.13.8) by sourceware.org (qpsmtpd/0.93/v0.84-503-g423c35a) with ESMTP; Fri, 30 Aug 2013 08:42:22 +0000 Authentication-Results: sourceware.org; auth=none X-Virus-Checked: by ClamAV 0.97.8 on sourceware.org X-Virus-Found: No X-Spam-Flag: YES X-Spam-SWARE-Status: Yes, score=9.3 required=5.0 tests=AWL,BAYES_99,HTML_MESSAGE,MIME_HTML_MOSTLY,RCVD_IN_SORBS_DUL,RCVD_VIA_APNIC,RDNS_NONE,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Status: Yes, score=9.3 required=5.0 tests=AWL,BAYES_99,HTML_MESSAGE,MIME_HTML_MOSTLY,RCVD_IN_SORBS_DUL,RCVD_VIA_APNIC,RDNS_NONE,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on sourceware.org X-Spam-Level: ********* X-HELO: m13-8.163.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=163.com; s=s110527; h=Received:Date:From:To:Subject:Sender:Content-Type: MIME-Version:Message-ID; bh=pxe6p5uct7JbB+kE+sLQQlDMPtahTW7HWVzh /CNVZho=; b=GQk+l54hskCFSqAgR6hwIIAm4jPq7pQiQRrq4e88L4TFnCgU6iOq cpopICOtAnq5VICkc4U+IHyTmmInrbTqWgpcm70vufMEribfKIbyQqCeEFPQjPCl J2dY9ZR7kTKghVr5xsamnH+xP2Ew87Y9hxXROGIo3xs0R97FmfkInks= Received: from admin$crifan.com ( [221.224.111.74] ) by ajax-webmail-wmsvr8 (Coremail) ; Fri, 30 Aug 2013 16:42:16 +0800 (CST) X-Originating-IP: [221.224.111.74] Date: Fri, 30 Aug 2013 16:42:16 +0800 (CST) From: [email protected] To: [email protected] Subject: cannot build crosstool due to Makefile issues (mixed implicit and normal rules) X-Priority: 3 X-Mailer: Coremail Webmail Server Version SP_ntes V3.5 build 20130709(22708.5479.5480) Copyright (c) 2002-2013 www.mailtech.cn 163com Sender: [email protected] X-CM-CTRLDATA: m0b5uWZvb3Rlcl9odG09ODg6ODE= Content-Type: multipart/alternative; boundary="----=_Part_331775_538457721.1377852136591" MIME-Version: 1.0 Message-ID: <[email protected]> X-CM-TRANSID:CMGowGB5IELpWiBSvTMLAA--.7403W X-CM-SenderInfo: pjuhv0onzd23rh6rljoofrz/1tbiTgmJpVEAG7HNzAAAsR X-Coremail-Antispam: 1U5529EdanIXcx71UUUUU7vcSsGvfC2KfnxnUU== ------=_Part_331775_538457721.1377852136591 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: 7bit ------=_Part_331775_538457721.1377852136591 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: 7bit <div style="line-height:1.7;color:#000000;font-size:14px;font-family:arial"> </div><br><br><span title="neteasefooter"><span id="netease_mail_footer"></span></span> ------=_Part_331775_538457721.1377852136591--
13.好的，接着去给：
发个空邮件：
结果悲催了：
相关内容为：
Hi. This is the qmail-send program at sourceware.org. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: ezmlm-get: fatal: only subscribers can thread (#5.7.1) --- Below this line is a copy of the message. Return-Path: <[email protected]> Received: (qmail 18899 invoked by uid 89); 30 Aug 2013 10:24:07 -0000 Received: from m13-8.163.com (HELO m13-8.163.com) (220.181.13.8) by sourceware.org (qpsmtpd/0.93/v0.84-503-g423c35a) with ESMTP; Fri, 30 Aug 2013 10:24:07 +0000 Authentication-Results: sourceware.org; auth=none X-Virus-Checked: by ClamAV 0.97.8 on sourceware.org X-Virus-Found: No X-Spam-Flag: YES X-Spam-SWARE-Status: Yes, score=9.0 required=5.0 tests=AWL,BAYES_99,HTML_MESSAGE,MIME_HTML_MOSTLY,RCVD_IN_SORBS_DUL,RCVD_VIA_APNIC,RDNS_NONE,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Status: Yes, score=9.0 required=5.0 tests=AWL,BAYES_99,HTML_MESSAGE,MIME_HTML_MOSTLY,RCVD_IN_SORBS_DUL,RCVD_VIA_APNIC,RDNS_NONE,SPF_FAIL autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on sourceware.org X-Spam-Level: ******** X-HELO: m13-8.163.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=163.com; s=s110527; h=Received:Date:From:To:Subject:Sender:Content-Type: MIME-Version:Message-ID; bh=lLTQAc98OtJHTXSpzEdFHy0Ltz0isbFm9x1i TD10LTQ=; b=fXNfXhbSMuxXQlHzTVyI18DH12QYcmbn+VawsPVLRXeqSNa5TWl0 RpNMHvxKA8FcUOlYOVqLDxonDYC+031JtJULO+Z4s1JRO8RJ0w6XGYl/2CUoV2Qd 7nfooHj9KdW/dWydFt/fezLp8zu7onbSkROKR1IBdVhWVzdTj2HjdyA= Received: from admin$crifan.com ( [221.224.111.74] ) by ajax-webmail-wmsvr8 (Coremail) ; Fri, 30 Aug 2013 18:24:02 +0800 (CST) X-Originating-IP: [221.224.111.74] Date: Fri, 30 Aug 2013 18:24:02 +0800 (CST) From: [email protected] To: [email protected] Subject: want get detail for message: cannot build crosstool due to Makefile issues (mixed implicit and normal rules) X-Priority: 3 X-Mailer: Coremail Webmail Server Version SP_ntes V3.5 build 20130709(22708.5479.5480) Copyright (c) 2002-2013 www.mailtech.cn 163com Sender: [email protected] X-CM-CTRLDATA: KYXtjWZvb3Rlcl9odG09ODg6ODE= Content-Type: multipart/alternative; boundary="----=_Part_353985_1870716182.1377858242959" MIME-Version: 1.0 Message-ID: <[email protected]> X-CM-TRANSID:CMGowGBZ_0DEciBSZ1MLAA--.38926W X-CM-SenderInfo: pjuhv0onzd23rh6rljoofrz/1tbiZQmJpVD+OUW9cQABsf X-Coremail-Antispam: 1U5529EdanIXcx71UUUUU7vcSsGvfC2KfnxnUU== ------=_Part_353985_1870716182.1377858242959 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: 7bit ------=_Part_353985_1870716182.1377858242959 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: 7bit <div style="line-height:1.7;color:#000000;font-size:14px;font-family:arial"> </div><br><br><span title="neteasefooter"><span id="netease_mail_footer"></span></span> ------=_Part_353985_1870716182.1377858242959--
即：
我，[email protected]，竟然不是subscriber
那很奇怪了，之前为何给我发
crossgcc Digest
啊？？？
14.实在搞不懂了。
还是抽空，去问问那个：
If despite following these instructions, you do not get the desired results, please contact my owner at [email protected]. Please be patient, my owner is a lot slower than I am ;-)
中的：
问问其，如何才能：
（1）如何才能，回复单个的message，比如：
cannot build crosstool due to Makefile issues (mixed implicit and normal rules)
（2）我已经收到了：crossgcc Digest
但是去回复，上述帖子的对应的thread地址：
但是却说我不是subscriber。
15.刚刚注意到，此处的人家说的：
To receive all messages with the same subject as message 12345, send an empty message to: [email protected]
中的message，好像是：
http://cygwin.com/ml/crossgcc/2013-08/msg00047.html
中的47，所以，再去试试，给：
发个邮件：
看看结果如何。
结果出现类似的错误：
Hi. This is the qmail-send program at sourceware.org. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: ezmlm-get: fatal: only subscribers can thread (#5.7.1) --- Below this line is a copy of the message.
看来，的确说明我[email protected]，当前不是subscriber。
16.
【总结】
转载请注明：在路上 » 【记录】尝试去回复crosstool-ng的mailing list即crossgcc中的单个帖子