USBCV R1.3 – 用于Windows XP SP2 (英文版)
安装应用程序InstallUSBCV131.msi (4MB) 包含USB 命令校验器 (USBCV)版本为R1.3.1和文档，USBCV R1.3.1是符合性测试工具，用来检测高速、全速和低速USB设备同USB设备框架(第9卷)、Hub设备的类(第11卷)、HID 的类和 OTG 规范的一致性，也包括物理存储的类和USB视频的类规范的测试。所有USB设备都需要通过这种设备固件测试以取得认证。 (144MB, 2008年1月) 是一个USB兼容性测试的独立的电子信号分析工具。USBET is the official compliance electrical analysis tool that performs pass/fail assessments on signal quality and inrush current data captured from an oscilloscope. USBET accepts . tsv and . csv data files generated by USB-IF approved digital oscilloscopes and produces the familiar . html results files of the analysis.
USB电子分析工具, 版本号2.22 – Windows XP and Windows Vista
This is an update to USBET version 2.21. USBET version 2.22 implements a new algorithm for assessing inrush current. Version 2.22 also validates the data set ensuring sample rates and data size is sufficient for reliable results. Please see the release notes for a list of changes.
To ensure proper installation, please uninstall all previous versions of USBET before installing version 2.21.
请
用户名:
USBHSET.msi 版本号1.1.0.4 – Windows 2000 or XP only
Version 1.1.04 provides procedure updates for testing legacy free systems
这个自解压文件, USBHSET.exe (1.4 MB), 含有USB高速电子测试工具包的安装介绍(ReadMeFirst.pdf) 和安装程序。This tool kit contains the Window-based HSET utility used to initiate test modes. Detailed test procedures for high-speed host, hub and device electrical testing, tailored to common test equipment, can be downloaded here . The USB scripts and GPIB software included in this release are obsolete and should not be used. A new USB Electrical Analaysis Tool is available separately for download (see USBET above). The procedures for legacy testing can be found in the USB-IF Compliance Program area. For further information about this tool kit and the installation procedure, please read the ReadMeFirst.pdf file first. This software provided courtesy of Intel Corporation
USBHTT 1.2 发布 – Windows 2000 and Windows XP only
应用程序, USBHTT.msi (11 MB), 含有USB2 Hub 事务翻译测试包。 USBHTT is a compliance test tool which evaluates Hi-Speed USB Hubs for conformance to the USB Hub device class (Chapter 11). USBHTT suite focuses on protocol evaluation of the transaction translator unit in high-speed hubs. The 1.2 release is a requirement for Hi-Speed USB Hub silicon certification. It is not required for end product hub certification. This version of USBHTT was posted on 7/07/2003. This software release will only work on Windows 2000 and Windows XP. Please check the release notes and accompanying documentations for details on using USBHTT and how to provide the USB-IF feedback on issues and suggestions. Some of the USBHTT tests require custom test devices. These devices may be ordered from the USB-IF eStore page USBHTT version 1.2 is a maintenance release that fixes test issues, improves logging features, and removes some tests from required sequences. As one part of Hi-Speed USB Hub silicon certification process, Hub Silicon Manufacturers use the USB-IF USBHTT Manufacturer Self-Testing Program to complete USBHTT test requirements.
USB On-The-Go
Two tools for validating USB On-The-Go devices are offered separately in the
OTG Electrical Tester (OET) validates both full-speed and high-speed OTG specific eletricals.
公司列表
Please download the
Compliance Updates
Please review the USB-IF
USBCV1.3.1版为设备框架测试的官方测试工具. As of April 2007, the mass storage class tests and the video class tests are official and mandatory. This software is provided courtesy of Intel Corporation.
注意：请不要将这个工具安装在装有早期USBCV版本的机器上。This software release will work on Windows XP SP2 (English version only) with all critical patches installed or on Windows Vista with User Access Control disabled. 这个工具需要一个增强主机控制接口（EHCI）. If testing Full or Low-speed devices, an intervening Hi-Speed USB Hub is required. USBCV R1.3.1 uses a special purpose driver for the Hi-Speed USB Host Controller. USBCV R1.3.1 automatically replaces the standard Microsoft EHCI host driver with its own test stack driver. When USBCV R1.3.1 exits, the original standard Microsoft EHCI host driver is restored. Stack switching has been extensively tested with Microsoft EHCI drivers only. Stack switching has not been tested with USB 2.0 host controller drivers provided by other vendors. Please read the Release Notes for details.
OTG Protocol Tester (OPT) validates both full-speed and high-speed protocols. Software and instructions for the for the OPT can be downloaded from the USB On-The-Go webpage . The download file includes the latest version of the OPT software, installation instructions and the OPT user guide. Company List and save as usb.if in the same directory where USBCV was installed. Please check the installation instructions for USBCV for details. Remember this list changes almost daily, be sure to get a fresh copy when you use the tools.Compliance Updates webpage frequently and subscribe to the 在此登录下载 USBET : usbguest
密码: noll5vex